Deepwater Diamond Wire Saw | SFI Orbimax
Deepwater Diamond Wire Saw - SFI Orbimax
0.00

Deepwater Diamond Wire Saw

+

Only left in stock

The Deepwater Diamond Wire Saws (DWDWS) are designed for deep water cutting of horizontal or vertical pipe. The DWDWS is run on hydraulic power and controlled remotely. This delivers a more efficient cutting action with enhanced operator safety and greatly extended wire life. Three models are available to cut from 4 inch - 52 inch O.D. (DN100-DN1300).

The Subsea DWDWS 1604 Deepwater Diamond Wire Saw (part number 10-10-516-ROV) is designed for subsea cutting of horizontal or vertical pipe, casings and structure at depths up to 3000 meters (9843sfw) within a range of 4 to 16 inch (102 to 406mm) outside diameter. Hydraulically powered, the DWDWS 1604 is controlled remotely from the surface using the Subsea TCP Topside Control Panel and your power unit, or with the HPU-84 Subsea Hydraulic Power Unit with integrated TCP.

DWDWS 1604 may also be controlled by ROV and powered via zero leak hot stabs. Every DWDWS is equipped with a ROV compliant control panel featuring easily readable gauges and large, tapered color-coded knobs operating a clutched mechanism to resist breakage. All DWDWS models come standard with Advanced Syntactic Flotation with Adjustable Buoyancy, Auto Wire Feed / Retract System, Auto Synchronized Clamping and a sealed, pressure adjusted 3 circuit hydraulic system.

DWDWS 1604 ships with (1) continuous loop diamond cutting wire that is quickly and easily changed in the field. Order replacement 1604 wires as Part Number P09-071-710. A highly recommended accessory is the dedicated DWDWS 3604 Shipping / Deployment Basket (Part Number H11-029-000).

  • Easily replaceable, long life diamond wire cutting element
  • Hydraulically operated synchronized clamping arms
  • Anti-slip hardened steel clamp grippers
  • Self adjusting automatic feed system with override clutch
  • Flotation rated to 3000 meters (9843 sfw)
  • Fiberglass encapsulated flotation
  • No significant increase to footprint
  • Weight in air = approximately 2000lbs for DWDWS 3616model
  • Weight in water = Neutral to 100lbs (45.36kg) negative(adjustable) all models
  • Center of buoyancy coincident to center of gravity (allowssaw to be rotated subsea)
  • 5 compliant ROV handles
  • Aluminum "mono-block‚" control manifold
  • Single zero leak hot stab with 20 ft (6m) flying lead
  • Simple and intuitive (color coded) ROV interface panelequipped with pressure gauges and flow meters
  • Heavy duty pressure compensated shipping/deploymentbasket (optional)


Power:
Hydraulic

Mounting Method:
OD Mount

Pipe Outside Diameter Range (OD):
4.016in-15.984in (102.006mm-405.994mm)

Product Part #:
10-10-516-ROV

Operating Dimensions:
62in x 53in x 46in (1575 x 1346 x 1168mm)

Operating Weight:
In Air 1200 lbs (544 kg)

Warranty:
1 Year Limited Warranty

Description

The Deepwater Diamond Wire Saws (DWDWS) are designed for deep water cutting of horizontal or vertical pipe. The DWDWS is run on hydraulic power and controlled remotely. This delivers a more efficient cutting action with enhanced operator safety and greatly extended wire life. Three models are available to cut from 4 inch - 52 inch O.D. (DN100-DN1300).

The Subsea DWDWS 1604 Deepwater Diamond Wire Saw (part number 10-10-516-ROV) is designed for subsea cutting of horizontal or vertical pipe, casings and structure at depths up to 3000 meters (9843sfw) within a range of 4 to 16 inch (102 to 406mm) outside diameter. Hydraulically powered, the DWDWS 1604 is controlled remotely from the surface using the Subsea TCP Topside Control Panel and your power unit, or with the HPU-84 Subsea Hydraulic Power Unit with integrated TCP.

DWDWS 1604 may also be controlled by ROV and powered via zero leak hot stabs. Every DWDWS is equipped with a ROV compliant control panel featuring easily readable gauges and large, tapered color-coded knobs operating a clutched mechanism to resist breakage. All DWDWS models come standard with Advanced Syntactic Flotation with Adjustable Buoyancy, Auto Wire Feed / Retract System, Auto Synchronized Clamping and a sealed, pressure adjusted 3 circuit hydraulic system.

DWDWS 1604 ships with (1) continuous loop diamond cutting wire that is quickly and easily changed in the field. Order replacement 1604 wires as Part Number P09-071-710. A highly recommended accessory is the dedicated DWDWS 3604 Shipping / Deployment Basket (Part Number H11-029-000).

Features

  • Easily replaceable, long life diamond wire cutting element
  • Hydraulically operated synchronized clamping arms
  • Anti-slip hardened steel clamp grippers
  • Self adjusting automatic feed system with override clutch
  • Flotation rated to 3000 meters (9843 sfw)
  • Fiberglass encapsulated flotation
  • No significant increase to footprint
  • Weight in air = approximately 2000lbs for DWDWS 3616model
  • Weight in water = Neutral to 100lbs (45.36kg) negative(adjustable) all models
  • Center of buoyancy coincident to center of gravity (allowssaw to be rotated subsea)
  • 5 compliant ROV handles
  • Aluminum "mono-block‚" control manifold
  • Single zero leak hot stab with 20 ft (6m) flying lead
  • Simple and intuitive (color coded) ROV interface panelequipped with pressure gauges and flow meters
  • Heavy duty pressure compensated shipping/deploymentbasket (optional)

Specifications



Power:
Hydraulic

Mounting Method:
OD Mount

Pipe Outside Diameter Range (OD):
4.016in-15.984in (102.006mm-405.994mm)

Product Part #:
10-10-516-ROV

Operating Dimensions:
62in x 53in x 46in (1575 x 1346 x 1168mm)

Operating Weight:
In Air 1200 lbs (544 kg)

Warranty:
1 Year Limited Warranty

Downloads