IHP All On Board (AOB) Internal Pipe Clamp | SFI Orbimax
UPGRADE WITH ORBIMAX THIS EOFYMore info
IHP All On Board (AOB) Internal Pipe Clamp - SFI Orbimax
IHP All On Board (AOB) Internal Pipe Clamp - SFI Orbimax
0.00

IHP All On Board (AOB) Internal Pipe Clamp

− +

Only left in stock

  • Description
  • Benefits
  • Features
  • Specifications
  • Downloads

The IHP All On Board (AOB) Internal Clamp has great alignment and reforming capacity, wireless remote control and charger, a battery effective for up to 100 welds and features such as automatic stop at end of pipe. The clamps low maintenance cost and ability to cater for 3 pipe sizes (2 for pneumatic range) makes it extremely economical. It is an easy to handle clamp as it does not require pre-setting and has no cables, hoses, reach rods or compressors.

All ihps, non-powered as well as powered, are able to reform pipes with wall thickness up to 25 mm. and align pipes with wall thickness up to 50 mm.

The Weld-Tech AOB IHP's have the following benefits:

  • Economical due to: Low maintenance cost; one clamp for 3 pipe sizes (2 for pneumatic range)
  • Easy to handle due to: No presetting for specific inner diameter; no cables, hoses, reach rod or compressor
  • Effective due to: Great alignment and reforming capacity; wireless remote control and charger; automatic stop at end of pipe; battery effective for up to 100 weldings

    Each AOB clamp have the following features:

        • 2 pcs drive motors (top & bottom) 24Volts, 3000 rpm, 300W
        • Gearing VF44 1-35
        • 2 sets of batteries (24 Volts)
        • Gas springs to activate the motors to ensure always in full contact with pipe
        • Infrared sensor in the front for automatic stop at the end of the pipe
        • Electronic and hydraulic pump mounted on the clamp
        • 1 pc remote control (wireless)
        • 1 pc battery charger for batteries
        • 1 pc battery charger for remote control
        • 1 pc handoperated pump in the front to pull-in motors for insert the clamp in the pipe or for transport
    Range ID (inch) Range ID (mm) Shoes Weight (kg) Length (mm)
    18 - 24 383 - 601 2 x 8 263 2322
    26 - 30 532 - 751 2 x 12 405 2286
    32 - 36 683 - 901 2 x 14 481 2286
    38 - 42 832 - 1051 2 x 18 659 2286
    44 - 48 991 - 1211 2 x 22 885 2286
    50 - 54 1152 - 1371 2 x 24 1172 2286
    56 - 60 1302 - 1521 2 x 28 1270 2286

    Description

    The IHP All On Board (AOB) Internal Clamp has great alignment and reforming capacity, wireless remote control and charger, a battery effective for up to 100 welds and features such as automatic stop at end of pipe. The clamps low maintenance cost and ability to cater for 3 pipe sizes (2 for pneumatic range) makes it extremely economical. It is an easy to handle clamp as it does not require pre-setting and has no cables, hoses, reach rods or compressors.

    All ihps, non-powered as well as powered, are able to reform pipes with wall thickness up to 25 mm. and align pipes with wall thickness up to 50 mm.

    Benefits

    The Weld-Tech AOB IHP's have the following benefits:

    • Economical due to: Low maintenance cost; one clamp for 3 pipe sizes (2 for pneumatic range)
    • Easy to handle due to: No presetting for specific inner diameter; no cables, hoses, reach rod or compressor
    • Effective due to: Great alignment and reforming capacity; wireless remote control and charger; automatic stop at end of pipe; battery effective for up to 100 weldings

      Features

      Each AOB clamp have the following features:

          • 2 pcs drive motors (top & bottom) 24Volts, 3000 rpm, 300W
          • Gearing VF44 1-35
          • 2 sets of batteries (24 Volts)
          • Gas springs to activate the motors to ensure always in full contact with pipe
          • Infrared sensor in the front for automatic stop at the end of the pipe
          • Electronic and hydraulic pump mounted on the clamp
          • 1 pc remote control (wireless)
          • 1 pc battery charger for batteries
          • 1 pc battery charger for remote control
          • 1 pc handoperated pump in the front to pull-in motors for insert the clamp in the pipe or for transport

      Specifications

      Range ID (inch) Range ID (mm) Shoes Weight (kg) Length (mm)
      18 - 24 383 - 601 2 x 8 263 2322
      26 - 30 532 - 751 2 x 12 405 2286
      32 - 36 683 - 901 2 x 14 481 2286
      38 - 42 832 - 1051 2 x 18 659 2286
      44 - 48 991 - 1211 2 x 22 885 2286
      50 - 54 1152 - 1371 2 x 24 1172 2286
      56 - 60 1302 - 1521 2 x 28 1270 2286

      Downloads