- Description
- Features
- Specifications
- Downloads
Trav-L-Cutter is a portable milling machine designed to cut and bevel simultaneously on most pipe materials and schedules. Secured by its tensioning chain, the Trav-L-Cutter drives itself around the pipe as it machines, producing a weld ready surface.
- Simultaneous Cutting & Beveling
- Horizontal and Vertical Operation
- Preferred Cold Cutting Method
- Compact, Portable Design
- Pneumatic or Hydraulic Drive
- Easy to Set-Up and Operate
- Fast and Accurate Cuts
- Accommodates 6"–72" OD (DN150–1800)
Product Specifications
| ITEM | SPECIFICATION |
| Machining Capacity | 6"–72" (153 to 1829mm) pipe, large diameter vessels. |
| Cutter Drive |
Pneumatic: 4 hp governed air motor coupled with worm gearbox. Hydraulic: As above, with hydraulic motor |
| Cutter Speed |
Pneumatic: Adjustable from 35–55 rpm for use on work-hardened alloys. Hydraulic: Adjustable from 0–60 rpm |
| Feed |
Pneumatic: 3/4 hp air motor coupled through overload clutch, gearbox and chain reduction to final machine drive sprocket. Hydraulic: 4 hp hydraulic motor |
| Feed Method | Positive, nonslip chain drive. |
| Air Requirements | 100 cfm @ 90 psi (.05 m3 /s @ 6.21 bar) |
| Hydraulic Requirements | 13–15 gpm @ 1500 psi (49.2–56.78 lpm @ 103.42 bar) not to exceed 2000 psi (137.9 bar) |
| Work Speed | 3" (76.2mm) surface feed/min maximum, or appr. 1 min/in (1 min/25.4mm) of pipe diameter. 10" (254mm) pipe = 10 min. Over 1 /2" (12.7mm) wall as well as most alloys require reduced feed rate. |
| Clearance | 10"-12" (254–309mm) radial, 20" (508mm) axial |
| Controls (Model E & HE) | Cutter on-off, feed on-off, with interlock to prevent machine feed unless cutter is turning, adjustable feed control. (Model HE Only) Flow control valves. Separate controls provide adjustable spindle speed and cutter speed. Forward/Reverse valve governs machine travel direction. |
| Weight: Operating | 215 lbs (97.6 kg) Shipping: 418 lbs (189.6 kg) |
| Finish | Powder coated enamel |
| Dimensions (LxWxH) | 24"(610 mm) x 20"(510 mm) x 10.75"(280 mm) |
Sizing
| US PIPE SIZE | METRIC PIPE SIZE | POWER SOURCE |
| 6" to 72" OD | DN150-1800 | Hydraulic |
| 6" to 72" OD | DN150-1800 | Pneumatic |
Trav-L-Cutter _ Spec SheetDescription
Trav-L-Cutter is a portable milling machine designed to cut and bevel simultaneously on most pipe materials and schedules. Secured by its tensioning chain, the Trav-L-Cutter drives itself around the pipe as it machines, producing a weld ready surface.
Features
- Simultaneous Cutting & Beveling
- Horizontal and Vertical Operation
- Preferred Cold Cutting Method
- Compact, Portable Design
- Pneumatic or Hydraulic Drive
- Easy to Set-Up and Operate
- Fast and Accurate Cuts
- Accommodates 6"–72" OD (DN150–1800)
Specifications
Product Specifications
| ITEM | SPECIFICATION |
| Machining Capacity | 6"–72" (153 to 1829mm) pipe, large diameter vessels. |
| Cutter Drive |
Pneumatic: 4 hp governed air motor coupled with worm gearbox. Hydraulic: As above, with hydraulic motor |
| Cutter Speed |
Pneumatic: Adjustable from 35–55 rpm for use on work-hardened alloys. Hydraulic: Adjustable from 0–60 rpm |
| Feed |
Pneumatic: 3/4 hp air motor coupled through overload clutch, gearbox and chain reduction to final machine drive sprocket. Hydraulic: 4 hp hydraulic motor |
| Feed Method | Positive, nonslip chain drive. |
| Air Requirements | 100 cfm @ 90 psi (.05 m3 /s @ 6.21 bar) |
| Hydraulic Requirements | 13–15 gpm @ 1500 psi (49.2–56.78 lpm @ 103.42 bar) not to exceed 2000 psi (137.9 bar) |
| Work Speed | 3" (76.2mm) surface feed/min maximum, or appr. 1 min/in (1 min/25.4mm) of pipe diameter. 10" (254mm) pipe = 10 min. Over 1 /2" (12.7mm) wall as well as most alloys require reduced feed rate. |
| Clearance | 10"-12" (254–309mm) radial, 20" (508mm) axial |
| Controls (Model E & HE) | Cutter on-off, feed on-off, with interlock to prevent machine feed unless cutter is turning, adjustable feed control. (Model HE Only) Flow control valves. Separate controls provide adjustable spindle speed and cutter speed. Forward/Reverse valve governs machine travel direction. |
| Weight: Operating | 215 lbs (97.6 kg) Shipping: 418 lbs (189.6 kg) |
| Finish | Powder coated enamel |
| Dimensions (LxWxH) | 24"(610 mm) x 20"(510 mm) x 10.75"(280 mm) |
Sizing
| US PIPE SIZE | METRIC PIPE SIZE | POWER SOURCE |
| 6" to 72" OD | DN150-1800 | Hydraulic |
| 6" to 72" OD | DN150-1800 | Pneumatic |
Downloads